Ergopower Technical Manual: Page 1
(Instructions appear below the image)

Steps 3A and 3B (Source: Campagnolo SRL)

  • Clamp a tube or round bar with a 24mm outside diameter in a vise.
  • Fit and secure the Ergopower control (drawing 3A) on the end.
  • It is possible to use a section of handlebar for this purpose.
  • If the control lever is in composite materials, remove the cover (drawing 3B).

Go to:
Ergopower Technical Manual Notes
Next Step

Back to Campagnolo Only!
Back to the Directory